How does The UNDERTAKER MTS work?

Secure the Undertaker in the receiver sleeve with pin and clip.

  1. Attach the cranks U-joint to the receiver assembly with the provided pin and clip.
  2. Crank the Undertaker down until it begins to touch the ground

undertaker motorcycle trailer 2

  1. Remove the wheel retaining strap and move it to the other side of the assembly.
    Proceed to move the motorcycle front tire into the assembly. Tire FAQ
    If the front fender hits on the Undertaker’s crossbar, crank the assembly up off of the ground a little…. then try again.

Secure the wheel strap through the spokes and tighten it down moderately.

  1. Attach the handlebar straps as shown left.
  2. Attach the straps to the underside of the bumber. Special Note
    Tighten the handlebar straps up moderately and proceed to crank the front tire off the ground.
    undertaker motorcycle trailer 3
    When the tire is far enough off of the ground for safe clearance, tighten up the handlebar straps enough to compress the shocks less than 1/4 of their travel.
  3. Look at the bike from the rear and tighten the handlebar straps so that the bike sits straight.

If your still using a flatbed trailer to haul your wheels to the shop or to the next rally, then we’ve got a reason to get rid of that trailer

The Undertaker Motorcycle Trailing System was developed to stop the pain, suffering, and humiliation that comes along with owning a trailer.

UndertakerMTS simplifies your haulin’ needs by giving you a more compact, gas efficient, and cost effective alternative to the old way.

Pull the UndertakerMTS out from behind the back seat or trunk
Slide it into a 2″ receiver hitch
Push the front tire into the cradle
Strap it down
Your done. Get goin’
When your ridin’ buddies see the UndertakerMTS, your going to have to hide it to keep the drool off it…

Check out the UndertakerMTS at your local retailer, and if they don’t have it… Tell them to get it!

Better yet, Get it here!

For more information on the Undertaker Motorcycle Trailing System, Check out our FAQ section.

To see how to hook it up, visit the “How does it work” page.

Accept no substitutes. The original UndertakerMTS is as original as the wheels it hauls…